Using Multi-Chamber Insufflation Bags

Without Humidification (Preferred Method)

1. Connect the bag directly to the Ozone Out port on your generator. Make sure the clamp on the bag is

open.

2. Once the bag is filled to your desired amount, remove it from the generator and clamp the bag.

3. Screw a catheter onto the bag. When you're ready for your insufflation, unclamp the bag and slowly roll it

to release the ozone.

With Humidification

1. Set up your bubbler or humidifier first (see “Setting Up Your Water Bubbler or Humidifier”). Unscrew the

male Luer lock from the destruct system.

2. Screw the fitting on the end of the bag's tubing onto the destruct system, keeping the OFF switch pointed

toward the bag until you're ready to fill it.

3. Make sure the clip on the bag is open, then turn the OFF switch on the destruct toward the destruct itself

to fill the bag.

4. Once filled to your desired amount, turn the OFF switch back toward the bag and close the clamp.

5. Unscrew the bag from the destruct.

6. Screw a catheter onto the bag. When you're ready for your insufflation, unclamp the bag and slowly roll it

from bottom to top to release the ozone.